DESCRIPTION
Especially designed for North American vehicles, the 2" square tube fits snugly on all Category III towing attachments. It allows to firmly install the winch to a vehicle. 12" long, it includes a 1/2'' bent pin and an 'R' tie. It is the basis of different combinations of accessories.
For all winches.
SPECIFICATIONS
Note: The square tubing can't be used alone; it must be combined with other accessories. Different combinations of accessories can be done depending on the application and the environment (see figures above).
For instance, when paired with certain accessories, it will permit horizontal pulling. In such case, the winch will face the load and the rope will be in a direct line towards the winch.
See Fig. 9, 10, 11
Whereas when combined with other accessories it will be used for vertical pulling. In these cases, the winch will face the anchor point and the rope will come from the top to the winch.
See Fig. 12, 13
Product | Dimensions | Weight | Material | |
PCA-1267 | 2'' x 2'' x 12'' | 4.6 lb |
Zinc plated steel |
Please see our video content explaining and showing all the products below.
VIDEO CONTENT Since the video mentioned above is 13-minute long, we thought we would put the markers below to allow you to simply select to your product(s) of interest at their designated times. Simply select the time and it will bring you to the correct time spot of the video |
|
PRODUCTS |
STARTS AT |
Anchoring systems for trees and poles |
|
PCA-1260 - Polyester sling |
|
PCA-1263 - Tree-mount winch anchoring system with rubber pads |
|
PCA-1268 - Winch support plate |
|
PCA-1264 (PCA-2264) - Vertical pull winch supports. Products modified since. |
|
PCA-1269 - Tree-mount winch anchoring system |
|
Anchoring systems for vehicles |
|
PCA-1267 - Hitch square tubing |
|
PCA-1266 - Heck Pack anchoring system with adaptor for 50 mm tow ball |
|
PCA-1268 - Winch support plate |
|
PCA-1264 (PCA-2264) - Vertical pull winch supports. Products modified since. |
|
PCA-1261 - Hitch plate for towing balls |